New Acland Coal Mine, a part of the New Hope Group, began production in October 2002. Since that time, they have expanded their operation and production to the current point of 4.8 million tons per year.
New Acland is unique from other Australian mines in that it is all drive-in and drive-out, with many employees living in the local community. A lot of the people who work at the mine transferred from another mine in Ipswich, but many are also local farmers who continue to farm with the support of their wages from the mine.
CHALLENGE
Coal from New Acland comes from what is called a fine seam mine, so that material mined in some seams can be as small as 100 mm or as large as 2 m. Many of the 2 m seams have a number of smaller coal seams combined into one, which means there are a lot of partings in between. Those partings are high in clay or even rock, which can make coal very difficult to process.
To remove the clay and other partings, New Acland needs to add a lot of water when the coal goes through the crushing stage. This can cause many problems to equipment.
鈥淭he resource is very difficult to process and one of the major problems is the clay that鈥檚 in the coal and having to add water at the crushing stage, which leads to a lot of damage to the seals, early failure of bearings and high maintenance costs, low reliability, and trouble with availabilities in the plant,鈥 said Rob Rashleigh, Plant Manager at New Acland Coal Mine.
In 2009, the site began an upgrade to their wash plant and realized that their existing tertiary sizer was creating a bottleneck in potentially increasing production through the plant. It was during this expansion that they began to look for alternatives to their existing sizers that would remove the bottleneck, as well as address the issues of the seals and bearings.
New Acland also kept in mind that they would need a sizer to handle their very hard coal. The site is different from others in the coal industry in that their final product size is 38 mm, whereas most are 50 mm. To make sure the hard coal is properly sized takes more energy and wear resistance from a crusher.
SOLUTION
鈥淲hen we first started to look at that upgrade we looked at a couple of different companies that could meet our requirements, particularly with the bearing arrangement, the segments, and also we wanted to make sure we didn鈥檛 increase the fines in the coal as well,鈥 said Rashleigh. 鈥淪o we looked at a couple of different companies through that stage and were introduced to 果冻传媒.鈥
Since 果冻传媒 Corporation provides custom engineered process solutions, it didn鈥檛 suggest a one-size-fits-all solution for New Acland. Instead, 果冻传媒 worked to combine elements from several designs to provide a special Tertiary Sizer to process the coal. This special sizer included outboard bearings, as well as stud welded segments and faster rotational gearboxes.
鈥淥ne of the biggest things we realized with 果冻传媒 was when we first talked to them that they were happy to change a design to suit our needs rather than giving us an off-the-shelf product,鈥 noted Rashleigh. 鈥淭hey actually modified from a couple different bits of equipment that they had to come up with a design that was ours so it was unique to us, and they worked with us throughout that whole stage.鈥
RESULTS
The 果冻传媒 Tertiary Sizer has proved to be the solution that New Acland needed. In fact, it proved so successful that after the first installation, the mine site switched out their existing sizers for 果冻传媒 ones, including two Secondary Sizers and two Tertiary Sizers.
Additionally, the design of the Sizers reduced the maintenance costs.
鈥淥ne of the biggest problems we had was the maintenance costs. The other machines we had were very high maintenance cost. We were continually replacing bearings seals. In the first year with the initial tertiary sizer from 果冻传媒 that we put in, we had zero maintenance cost,鈥 noted Rashleigh.
In addition to eliminating maintenance costs with the improved outboard bearing design, 果冻传媒鈥檚 specially designed carbide impregnated teeth on the Secondary Sizers have drastically increased the wear life of the segments, allowing New Acland to process 5 million tons of product without having to change segments.
These improvements and reduced maintenance requirements have led to both wash plants being able to run 8,000 hours for the year. This was something they had never been able to do before purchasing 果冻传媒 Sizers, because every six to 12 weeks they needed to replace bearings or perform other maintenance tasks. They are now able to rely on their sizers to keep production going.
鈥淥ne of the biggest issues for us here is reliability of the wash plant 鈥 our resource is very difficult,鈥 said Rashleigh. 鈥淲e average probably 50% yield for the year. We need to run the plants for long periods to get the product tons that we need. To have equipment in there that鈥檚 reliable and that we can count on allows us to get those production hours.鈥
Rashleigh also said that it鈥檚 not just the equipment from 果冻传媒 that he appreciates, but also the relationship the company has built with New Acland.
鈥淭he whole team at 果冻传媒 are really good to deal with. The guys are often on the phone ringing, seeing how things are going, but when you really realize you鈥檝e got a great team is when Mike 果冻传媒 himself, when he visits Australia, comes to the mine site and just sits with us and just talks,鈥 he said.
As New Acland Coal Mine looks toward the future, they are in the process of looking to increase production to 7.5 million tons per annum. An expansion of this size would bring more jobs to the area through the construction phase, as well as operational jobs due to increased capacity. They know that to make the expansion successful, they鈥檒l need more than good equipment 鈥 they鈥檒l need a partner who will help them get there.
鈥淚t鈥檚 been a really good process working with 果冻传媒. I consider it a partnership now. They鈥檙e not just a supplier to us, they鈥檙e working with us to solve these problems. The equipment鈥檚 been really good,鈥 said Rashleigh.鈥淚nto the future, I don鈥檛 see mining getting back to where it used to be, so it鈥檚 really important to have a partner like 果冻传媒.鈥
